Kathrein UFD 515 Operating Manual

Also see for UFD 515: Mode d'emploi Operating manual Mode d'emploi

Contents

Kathrein UFD 515 Operating Manual Manual pdf 54 page image

Setting system parametersA/V modeHere, you use the buttons to select the type of video signal whichis present on the Scart socket. Select the signal which your TV set isable to process.Observe the operating instructions of your television set!FBAS –composite baseband signal (colour-/picture-/blanking-/synchronising-signal)RGB – red-/green-/blue-signalY/C – S-VHS signal (luminance/chrominance).Confirm by pressing two times.Installation menuYou should not change the following settings without good reason asthey represent factory settings or operational settings that are adaptedto your receiving system.New settings are only required when changes or expansions aremade to the receiving system.The main menu consists of the following submenus:Select the "Installation" menu with the menu button , the buttons in the main menu and . If set, you must alsoenter the password. Select the menu points with the buttons.LNB configurationThe first submenu is the "LNB configuration". Press to open thismenu. Normally, you should not make any changes in this submenu.Before making any changes, however, you should make a note of thesettings in the form provided at the end of this User's Guide.Your receiver is set at the factory to the satellites of the ASTRA and54