Kathrein UFD 545 User Manual

Also see for UFD 545: Mode d'emploi

Contents

Installation Menu39The signal quality and the scan progress are indicated during the scan.The messageappears at the end of the scan. All new channels are added to the existing channellist.The scan does not include analogue channels.You can interrupt the search scan by pressing the L button.TP setup/scanIn this menu you can scan through thetransponders for specific channels, e.g.when new channels are offered in thepackage of a specific broadcaster. Youcan obtain this information from thecorresponding video text or TV andsatellite magazines. You can choosebetween "analogue" and "digital".Digital transponderThe following settings are possible in the"digital" submenu (select positions withou):•• the symbol rate with number buttons and• scan mode for freely receivable or free-to-air and unscrambled channels.The bar diagram indicates the signal strength.Start the scan by pressing O in the "scan" position.You will now see the message:If the scan is successful you will see the messageIf the scan is unsuccessful• Required satellite with - or +• the frequency of the transponder withnumber buttons,• the polarization with - or + button,Scan completedPress [OK] buttonScan activePress L-button to cancelSuccessError