Kathrein UFD 545 User Manual

Also see for UFD 545: Mode d'emploi

Contents

Controls, Indicators, Displays and Connections9Bedienelemente, Anzeigen und AnschlüsseIn this section you will find a short description of all controls, indicators, displaysand connections. The button symbols used here are also used in the description ofthe operating steps.Front view(panel folded down)Rear viewControls, indicators and displays on thefront panelControls and connections at the rear1 ON/OFF switch (with mains disconnection)2 Menu button to display and exit the menusor submenus3 Acknowledgement for remote control signal4 Select buttonto confirm a selection5 Operation indicator6 Standby indicator7 Cursor buttons to move through menu andchannel lists as well as to set the volume(corresponds to remote control)8 LED display (four-digit, 7-segment display)to show channel number and time.9 Press catch for front panelTo open press lightly on upper right side1 Antenna input (terrestrial)2 Modulator output3 Audio output2 Cinch socket outputs, left and rightchannel4 Digital sound output (AC3) – Cinch socketoutput5 Video output (FBAS)6 SCART socket TV connection7 SCART socket VCR/AUX connection8 DATA input/output socketInterface for serial data transmission(service)9 Satellite IF signal inputOutput of LNB supply voltage and controlsignals (22 kHz and DiSEqC 1.1)10 Satellite IF signal outputBridged Sat-IF signal11 Satellite IF input for analogue reception12 Mains power input 230 V AC13 DC voltage input 12…24 VDigital Video BroadcastingSELECTMENUCARAVAN DIGITAL ANALOG RECEIVERREMOTE TV/SATSTAND BY1 2 3 4 5 6 7 8 91 2 3 4 5 6 7 8 9 10 11 12 13