30Antenna signal and reception parameters button Channel menu – channel managementIf necessary, use the button to make the menutransparent.Use the and buttons to navigate across linesand columns and select the required channels. All selectedchannels are immediately set by the receiver and displayedin the background.If necessary, use the button to make the menutransparent.Use the ! button (green) to delete the selected channel.Use the # button (blue) to delete all channels in the channelpool.Channels that are deleted from the channel pool are onlyfound again when the satellite search is repeated.Delete one channel/all channels in channel poolThe “Antenna signal” sub-menu ( ) is used to align yourparabolic antenna optimally, if required. Rotate the antennaso that the signal strength and reception quality scales areat their optimum.In the event of very weak signals the signal strength scalemay even fall to “0”. In this case optimise the signal with thescale for the reception quality.If “Signal !” or “L” is shown in the display, a valid digitalsignal is being received.However, if “No signal” appears in the menu or “-” appearsinstead of the “L” on the right-hand side of the display, then
