Kauai Labs navX-MXP User Manual
                                                                                               | |
Contents
| 
SoftwarenavXUIcompleted. Once Magnetometer Calibration is complete, the Compass Angle text color willchange to white.9-axis (“Fused”) HeadingThe 9-axis heading is displayed in grey text if Magnetometer Calibration has not yet beencompleted and/or if no undisturbed magnetic readings have occurred.AltitudeThe Altitude displays the navX-MXP’s calculated current altitude, based upon the reading fromthe pressure sensor, the current temperature and the sea-level pressure.The Altitude is displayed in red text if a Pressure Sensor is not installed. Pressure Sensors areonly installed on the navX-MXP Aero. Valid altitude readings are displayed in white text.Installing/Running the navXUITo run the navXUI, the navX-MXP must be connected to a PC running Windows viaUSB.Make sure Java 7 (version 1.7) or Java 8 (version 1.8) is installed on your computer.The 64-bit version of Java is recommended. To tell which version of java is currently“Active”, open up a command window, and type this command:java -versionDownload the and unzip the contents to your local computer.Run the setup.exe program, which will install the navXUI, as well as all necessary devicedrivers for communicating over USB with the navX-MXP, as well as some additionaltools.Start the navXUI:From your Start Menu, select “Kauai Labs” and then “navX-MXP” and click on the “navXUI”icon to start the navXUI.If your computer has more than one serial port, you can select which serial port to use byclicking on the up/down arrows in the COM port selection control in the UI.Tools35 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine