10SYSTEM MenuPanel Lock ( )The Lock ( ) function allows the state of the MP11’s various controls to be temporarily locked, preventing accidentalbutton pushes, pedal presses, or wheel movements. Activating and deactivating the Lock functionPress the LOCK ( ) button.The LED indicator for the LOCK ( ) button will turn on, and thelock pop-up will be briefly shown in the LCD display.By default, the Lock function will lock all of the MP11’s panelbuttons and knobs (Panel Lock), preventing any accidentaladjustments during performances etc.* The VOLUME, LINE IN, and section VOLUME faders will not be locked. Thekeyboard will also remain active.Press the LOCK ( ) button again to deactivate the lock. Changing the Lock modePress and hold the LOCK ( ) button, then press the +/YES or–/NO buttons to cycle through the different Lock modes. Lock modesLock mode DescriptionPanel Lock The main control panel buttons and knobs will be locked.Bend Lock The pitch bend wheel will be locked.Mod. Lock The modulation wheel will be locked.Center Lock The centre pedal will be locked.Left Lock The left pedal will be locked.EXP Lock The expression pedal (EXP) will be locked.LED indicator ON:Lock function is activatedLED indicator OFF:Lock function is deactivatedhold* The Lock mode can also be changed in the SYSTEM menu. For moreinformation, please refer to page 99.MP11_EN_20140421_R102.indd 109 2014/04/22 8:49:22
