SYSTEM Menu1 Utility1. System TuningThis parameter sets the global master tuning of the MP11 in0.5Hz increments.* The default setting is A = 440.0 Hz2. Eff. SW ModeThis function determines whether the ON/OFF state of the EFX,REVERB, and AMP buttons is recalled when selecting sounds.Mode DescriptionPreset ON/OFF state is recalled when selecting sounds.Temp. ON/OFF state is not recalled when selecting sounds.Fixed ON/OFF state and Eff. Setting are not recalled whenselecting sounds.* The default setting is Preset.3. Knob ActionThis parameter determines the adjustment behaviour of thefour control knobs (A, B, C, D).Mode DescriptionNormal Value changes immediately when control knob is turned.CatchValue does not change until control knob ‘catches’ thepreviously stored value, thus preventing unexpectedjumps in parameter values.* The default setting is Normal.4. Volume Fader ActionThis parameter determines the adjustment behaviour of thesection volume faders.Mode DescriptionNormal Volume changes immediately when fader is moved.CatchVolume does not change until fader ‘catches’ thepreviously stored volume value, thus preventingunexpected volume jumps.* The default setting is Normal.5. LCD ContrastThis parameter adjusts the contrast of the LCD display.The contrast becomes sharper as the value increases.* The default setting is 5.6. LCD ReverseThis parameter inverts the black and white pixels of the LCDdisplay, which may improve visibility in certain situations.* The default setting is OFF.7. Input LevelThis parameter adjusts the gain of the MP11’s LINE IN jacks.If the output level of the external device is too high, reduce the valueof this parameter. Alternatively, if the output is too low, increasethe value of this parameter.* The default setting is 0 dB.8. Audio Out ModeThis parameter allows the MP11’s LINE OUT signal to bechanged from stereo to dual-mono.This may be useful in certain situations, allowing one output to beused for a monitor speaker and the other to be plugged into themixing console.Mode DescriptionStereo The Line-out signal is normal stereo.2xMono The Line-out signal is mono on both jacks.* The default setting is Stereo.* Stereo EFX such as AutoPan will be turned OFF when 2xMono is selected.10. Auto Power OffThis parameter determines the period of inactivity that shouldpass before the MP11 automatically turns OFF.Value DescriptionOff The Auto Power Off function is disabled.30 mins. The MP11 will turn off after 30 minutes of inactivity.60 mins. The MP11 will turn off after 60 minutes of inactivity.120 mins. The MP11 will turn off after 120 minutes of inactivity.* The default setting for this parameter depends on the market region.value : 1 ~ 10SYSTEM Menu parameters & functionsvalue : 427.0 ~ 453.0 Hz preset, temp., fixednormal , catcH normal , catcHon , offvalue : –18 dB ~ +18 dB stereo, 2 xmono9. Lock SW ModeThis function determines which controls will be locked whenthe LOCK ( ) button is pressed.Mode DescriptionPanel The main control panel will be locked.Bend The pitch bend wheel will be locked.Mod. The modulation wheel will be locked.Center The centre pedal will be locked.Left The left pedal will be locked.EXP The expression pedal (EXP) will be locked.* The default setting is Panel Lock.off, 30 mins ., 60 mins ., 120 mins .6 typesMP11_EN_20140421_R102.indd 99 2014/04/22 8:49:18