1Appendix SOUND/SETUP Program/BankIf the Receive Mode MIDI parameter is set to Panel (page 102), the MP11 receives MIDI data on the System Channelonly. To change internal sounds via MIDI, please refer to the SOUND Program Number list below.* Note: If the MP11 receives the Program Number from 1 to 128 and Bank number MSB 0 or 1 in the System Channel, the MP11 will switch to SETUP mode andthe corresponding SETUP is recalled. When the Receive Mode is Section, the MP11 can be received to each internal sound sections individually.Panel Mode:SETUP Program NumberBANK#MSB 1: SETUP mode ONBANK#LSB 0-25: BANK A-ZPROGRAM 1-8: Setup Variation 1-8SOUND Program NumberBANK#MSB 0: SETUP mode OFFBANK#LSB 0: PIANO Section1: E.PIANO Section2: SUB SectionPROGRAM 1-12: PIANO/E.PIANO Section’s Sound variation 1-121-16: SUB Section’s Sound variation 1-16* Only one sound section is activated.Section Mode:BANK#MSB (ignored)BANK#LSB (ignored)PROGRAM 1-12: PIANO/E.PIANO Section’s Sound variation 1-121-16: SUB Section’s Sound variation 1-16*For each section’s Receive Channel.*Not related to Setup ON/OFF.MP11_EN_20140421_R102.indd 133 2014/04/22 8:49:33
