Kawai MP11 Owner's Manual

Also see for MP11: Owner's manual

Contents

Kawai MP11 Owner's Manual Manual pdf 16 page image

1Introduction2 Front Panel: Jacks & ConnectorsHEADPHONE jackThe headphone jack is located at the left end of the key blockand used to connect a pair of headphones equipped with astandard 1/4” phone jack.USB TO DEVICE portThe USB to Device port is located at the right end of the keyslip and used to connect a FAT or FAT32 formatted USB memorydevice to load and save data. Rear Panel: Jacks & ConnectorsPOWER SectionAC INConnect the power cable included with the MP11 to thisreceptacle.POWER SWITCHThis switch turns the MP11 ON and OFF.* The MP11 features a power saving mode that can turn off the instrumentautomatically after a specified period of inactivity. For more information,please refer to page 99.MIDI SectionMIDI THRU/OUT/IN jacksThese jacks are used to connect the MP11 to external MIDIdevices, and also to a computer with a MIDI interface as analternative to the ‘USB to Host’ port.USB TO HOST portThis port is used to connect the MP11 to a computer using aUSB cable. When connected, the instrument can be used as astandard MIDI device, allowing it to send a receive MIDI data.Connect a ‘B’ type USB connector to the instrument, and an ‘A’type USB connector to the computer.* When connecting the MP11 to a computer using the ‘USB to Host’ port,additional driver software may be required. For more information, pleaserefer to page 110.Part Names & Functions.* The instrument’s USB MIDI port and MIDI IN/OUT jacks can be connectedand used simultaneously. To adjust MIDI routing, please refer to the MIDIparameters in the SYSTEM menu, explained on page 102.MP11_EN_20140421_R102.indd 16 2014/04/22 8:48:44