Kawai MP11SE Owner's Manual
                                                                                                                                                    | |
Contents
| 
118AppendixSoftware UpdateThis page contains instructions for updating the system software of the MP11SE, when issued by Kawai.Please read these instructions thoroughly before attempting to perform the software update.This update will clear any user-created SOUNDs/SETUPs stored in memory.To retain this data, please use the AllBackup function before updating. Checking the software versionTo check the current software version installed on the MP11SE,press and hold the STORE button, then turn the instrument ON.The current software (Program) version will be shown on thefirst line of the LCD display.If the Program version number is greater than or equal to theupdate version, no further action is necessary.* Turn the instrument OFF and ON to return to normal operation.If the Program version number is lower than the update version,please continue to follow the instructions below.1. Prepare the USB memory deviceExtract the software update ZIP file and copy the included .SYSfiles to the root folder of a USB memory device.* USB devices should be formatted to use the ‘FAT’ or ‘FAT32’ filesystems.2. Connect the USB memory deviceWhile the instrument is turned off:Connect the prepared USB memory device to the USB port.3. Start the updatePress and hold buttons 6, 7, and 8 in the SETUP section, thenturn on the instrument.The update process will start automatically after a few seconds,and status messages will be shown in the LCD display.* Do not remove the USB memory device while the software update is inprogress.4. Finish the update, disconnect the USB memory deviceAfter approximately 60-90 seconds (depending on the numberof update files), a message will be shown in the LCD display,indicating that the software update has been successful.Disconnect the USB memory device, then press and hold thePOWER switch to turn the instrument OFF. When the instrumentis turned ON, the updated software will be used automatically.* If the software update is unsuccessful, restart the process from step 1.holdholdholdholdProgramversion |
Related manuals for Kawai MP11SE
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine