Kawai MP11SE Owner's Manual

Contents

Kawai MP11SE Owner's Manual Manual pdf 47 page image

47EDIT Menu6 Controllers1. Right Pedal on , offThis parameter determines whether or not the right pedal ofthe GFP-3 pedal unit is active for the selected section.* This parameter is not stored to SOUND but to SETUP only.2. Right Pedal Assign 18 functions (piano, suB)28 functions (e . piano)This parameter selects the function assigned to the right pedalof the GFP-3 pedal unit.* This parameter is common for all three sound sections.* This parameter is not stored to SOUND but to SETUP only.3. Damper Pedal Mode normal , H oldThis parameter determines whether or not the damper pedalshould sustain sounds indefinitely without decay.* This parameter is not stored to SOUND but to SETUP only.4. Center Pedal on , offThis parameter determines whether or not the centre pedal ofthe GFP-3 pedal unit is active for the selected section.* This parameter is not stored to SOUND but to SETUP only.5. Center Pedal AssignThis parameter selects the function assigned to the centre pedalof the GFP-3 pedal unit.* This parameter is common for all three sound sections.* This parameter is not stored to SOUND but to SETUP only.6. Left Pedal on , offThis parameter determines whether or not the left pedal of theGFP-3 pedal unit is active for the selected section.* This parameter is not stored to SOUND but to SETUP only.7. Left Pedal Assign 18 functions (piano, suB)28 functions (e . piano)This parameter selects the function assigned to the left pedal ofthe GFP-3 pedal unit.* This parameter is common for all three sound sections.* This parameter is not stored to SOUND but to SETUP only.8. Pitch Bend on , offThis parameter determines whether or not the pitch bendwheel is active for the selected section.9. Pitch Bend Range value : 0 ~ 7This parameter sets the range of the pitch bend wheel in semi-tone steps.* The range differs for the internal sound (0 ~7) and MIDI (0~12) sections.10. Soft Pedal Depth value : 1 ~ 10This parameter adjusts the effectiveness (i.e. depth/strength) ofthe soft pedal.* This parameter is not stored to SOUND but to SETUP only.