Kawai MP11SE Owner's Manual

Contents

Kawai MP11SE Owner's Manual Manual pdf 94 page image

94USB MenuUSB Menu functions1 LoadThese functions allow data stored on a USB memory device to be loaded into the instrument’s internal memory.Load functions will overwrite the existing data stored in internal memory.Exercise caution when using these functions in order to prevent accidental data loss.1. Load One SoundThis function loads a SOUND file stored on a USB memory,replacing the preset parameters for that specific sound.After selecting this function, select the desired SOUND filefrom the file/folder listing screen.Finally, press the F2 or F3 function buttons to confirm or cancelthe load operation.* After loading, the SOUND will be selected automatically, and all othersections will be turned OFF. SETUPs will also be turned OFF.2. Load One SetupThis function loads a SETUP file stored on a USB memory deviceinto one of the MP11SE’s 208 SETUP memories.After selecting this function, select the desired SETUP file fromthe file/folder listing screen. Then press the BANK and SETUPmemory buttons to specify the destination SETUP memory.Finally, press the F2 or F3 function buttons to confirm or cancelthe load operation.* After loading, the SETUP will be selected automatically.3. Load SMFThis function loads an SMF song file stored on a USB memorydevice into the MP11SE’s internal song recorder memory.After selecting this function, select the desired SMF file fromthe file/folder listing screen. Then use the control knobs A, C,and D to specify the destination song memory and keyboard/drum channels.DrumchannelKeyboardchannelSongmemoryFinally, press the F2 or F3 function buttons to confirm or cancelthe load operation.* After loading, the MIDI record/playback screen will be shown in the LCDdisplay and the destination song memory will be selected automatically.* For more information about the song recorder, please refer to page 65.4. Load All SoundThis function replaces the preset parameters for all internalsounds from an All Sound file stored on a USB memory device.After selecting this function, select the desired All Sound filefrom the file/folder listing screen.Finally, press the F2 or F3 function buttons to confirm or cancelthe load operation.5. Load All SetupThis function restores all SETUP memories from an All Setup filestored on a USB memory device.After selecting this function, select the desired All Setup filefrom the file/folder listing screen.Finally, press the F2 or F3 function buttons to confirm or cancelthe load operation.6. Load All BackupThis function restores the parameters for all SETUP memories,SOUND parameters, and SYSTEM settings from an All Backupfile stored on a USB memory device.After selecting this function, select the desired All Backup filefrom the file/folder listing screen.Finally, press the F2 or F3 function buttons to confirm or cancelthe load operation.