Kawai MP11SE Owner's Manual
                                                                                                                                                    | |
Contents
| 
54EDIT MenuEDIT Menu parameters (MIDI OUT)1 Channel/Program1. MIDI Transmitting ChannelThis parameter determines which MIDI channel will be used totransmit event information for the selected Zone.* By default, ZONE1~ZONE4 are assigned MIDI channels 01~04.* The specified MIDI transmit channel should match the MIDI Receivechannel of the connected MIDI device.2. ProgramThis parameter determines which Program Change Numberwill be transmitted when a SETUP is recalled. For example,the desired Program number of a sound on the external MIDIdevice.3/4. Bank MSB/Bank LSBThis parameter determines which MSB and LSB number willbe transmitted when a SETUP is recalled. The MIDI standardallocates 128 storage spaces, however this number can beexpanded using an MSB and an LSB.The diagram to the right illustrates how the Program Number,MSB Bank, and LSB Bank are organised.* Please refer to the owner’s manual of the connected MIDI device forfurther information.2 SETUP1. Send ProgramThis parameter determines whether or not a Program ChangeNumber will be transmitted when a SETUP is recalled.To change sounds on external MIDI devices when recalling a SETUP, setthis parameter to ON.2. Send BankThis parameter determines whether or not Program BankNumbers (MSB, LSB) will be transmitted when a SETUP isrecalled.If the external MIDI device requires a Bank Select message, set thisparameter to ON.3. Send VolumeThis parameter determines whether or not an initial MIDIVolume message will be transmitted when a SETUP is recalled.* Adjusting the volume of a Zone by turning the control knobs will stilltransmit values even if this parameter is set to OFF.4. Send KnobsThis parameter determines whether or not control knobsettings will be transmitted (ON) or not (OFF) when a SETUPis recalled.* Turning the control knobs will still transmit values even if this parameteris set to OFF. SETUP parameters in the SYSTEM menuThe above Send parameters can be overridden by the SETUPProgram, SETUP Bank, SETUP Volume, SETUP Knobs parametersin the MIDI category of the SYSTEM menu (page 104).When these SETUP parameters are set to OFF, an asterisk will beshown beside the relevant Send parameter to indicate that theEDIT menu setting is being overridden.value : 01cH ~ 16 cHon , offon , offon , offon , offvalue : 1 ~ 128value : 0 ~ 127Program NumberMSB BankLSB BankAsterisk:Parameter isoverridden bySETUP menu |
Related manuals for Kawai MP11SE
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine