Kenwood 5.1 KRF-V7050D Instruction Manual

Contents

Kenwood 5.1 KRF-V7050D Instruction Manual Manual pdf 2 page image

2PreparationsUnits are designed for operation as follows.U.S.A. and Canada ........................................... AC 120 V onlyAustralia ........................................................... AC 240 V onlyEurope and U.K. ............................................... AC 230 V onlyChina and Russia ............................................ AC 220 V onlyOther countries ............ AC 110-120 / 220-240 V switchable*Unpack the unit carefully and make sure that all accessories are put asideso they will not be lost.Examine the unit for any possibility of shipping damage. If your unit isdamaged or fails to operate, notify your dealer immediately. If your unitwas shipped to you directly, notify the shipping company without delay.Only the consignee (the person or company receiving the unit) can file aclaim against the carrier for shipping damage.We recommend that you retain the original carton and packing materialsfor use should you transport or ship the unit in the future.Keep this manual handy for future reference.Before applying the power Caution : Read this page carefully to ensure safeoperation.UnpackingNote:Our warranty does not cover damage caused by excessive line voltagedue to improper setting of the AC voltage selector switch.* AC voltage selectionMove switch lever tomatch your line voltagewith a small screw-driver or other pointedtool.AC voltage selector switchThe AC voltage selector switch on the rear panel is set to the voltage thatprevails in the area to which the unit is shipped. Before connecting thepower cord to your AC outlet, make sure that the setting position of thisswitch matches your line voltage. If not, it must be set to your voltagein accordance with the following direction.LVIDEO 3VIDEO 2VIDEO 1R A L CLRLR BPLAY INPLAY INPLAY INREC OUTPLAY INMONITOROUT VIDEO 1DVDR75μsAM 10kHzFM 100kHz50μsAM 9kHzFM 50kHzDE-EMPHASISCHANNELSPACEAC 110V -120VAC 220V -240VWARNING :TO PREVENT FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS APPLIANCE TO RAIN ORMOISTURE.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS IN-SIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERTTHE USER TO THE PRESENCE OF UNINSULATED “DAN-GEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURETHAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTI-TUTE A RISK OF ELECTRIC SHOCK TO PERSONS.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENSafety precautionsTHE EXCLAMATION POINT WITHIN AN EQUILATERAL TRI-ANGLE IS INTENDED TO ALERT THE USER TO THE PRES-ENCE OF IMPORTANT OPERATING AND MAINTENANCE(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOM-PANYING THE APPLIANCE.*AC plug adaptor (1)*Use to adapt the plug on the powercord to the shape of the wall outlet.(Accessory only for regions where useis necessary.)For KRF-V7050DBatteries (R6/AA) (2)Remote control unit (1)RC-R0613For VR-507Batteries (R6/AA) (2)Remote control unit (1)RC-R0720AccessoriesFM indoor antenna (1) AM loop antenna (1)Microcomputer malfunctionIf operation is not possible or an erroneous display appears, even thoughall connections have been made properly, reset the microcomputerreferring to “In case of difficulty”. tMaintenance of the unitWhen the front panel or case becomes dirty, wipe with a soft, drycloth. Do not use thinner, benzine, alcohol, etc. for these agents maycause discoloration.In regard to contact cleanerDo not use contact cleaners because it could cause a malfunction.Be specially careful not to use contact cleaners containing oil, forthey may deform the plastic component.