Kenwood 5.1 KRF-V7050D Instruction Manual

Contents

Kenwood 5.1 KRF-V7050D Instruction Manual Manual pdf 21 page image

21OperationsNormal playback1Listening to a source componentUse the INPUT SELECTOR knob to select the source youwant to listen to.The input sources change as shown below:Selecting a source using the INPUT SELECTOR knob.Adjusting the toneYou can adjust the sound quality when the receiver is in the PCM stereoand analog stereo mode.1 Press the SOUND key to select the tone mode to be adjusted.• The bass and treble levels are adjustable from -10dB to +10dB in 2step increments.• The adjustment item is displayed for approximately 8 seconds.2 Use the MULTI CONTROL knob or keys to adjust the soundquality.BASS: Select this to adjust the low frequency range.(Press the SOUND key once.)TREB: Select this to adjust the high frequency range.(Press the SOUND key twice.)FMAMMHzkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPMEMOST.TUNEDAUTO SOUND AUTOLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSSWLSP A RSTEREOOnce-touch low frequency emphasis (bass boost)(remote control only)You can adjust the sound quality when the receiver is in the PCM stereoand analog stereo modes.Press the B. BOOST or BASS BOOST key.• Press the key once to select the maximum (+10dB) low frequencyemphasis setting.• This key does not function when the receiver is in the sound quality orambience effects adjustment mode.Switching back to the previous settingPress the B. BOOST or BASS BOOST key again.Adjusting the sound1 “PHONO”2 “TUNER”3 “ C D / D V D ”4 “TAPE” or “MD”5 “ V I D E O 1 ”6 “ V I D E O 2 ”7 “ V I D E O 3 ”8 “ D V D / 6 c h ”9 “AV AUX”RC-R0720INPUTSELECTORINPUTSELECTORINPUT SELECTORVOLUME CONTROLVOLUMEVOLUMERC-R0613 VOLUMEVOLUME SOUNDSOUNDMUTEMUTEB. BOOSTMULTICONTROLMULTICONTROLRC-R0613RC-R0720BASSBOOSTSOUNDVOLUME CONTROLSOURCE DIRECTPHONES SPEAKERS A/BMULTI CONTROL23Start playback from the selected source.Use the VOLUME CONTROL knob or VOLUME keys toadjust the volume.