Kenwood 5.1 KRF-V7050D Instruction Manual

Contents

Kenwood 5.1 KRF-V7050D Instruction Manual Manual pdf 27 page image

27OperationsSurround playThe DTS compatible models can reproduce a CD, DVD, or LD carryingthe DTS mark.DOLBY DIGITAL can be used when playing DVD or LD software bearingthe mark and DOLBY DIGITAL format digital broadcasts (etc.).DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playingvideo, DVD, or LD software bearing the mark.• Turn ON related components.• Complete “Preparing for surround sound” (speaker settings). (• Use the INPUT SELECTOR to select the component you wish to playback with surround sound.• Use the INPUT MODE key to select the input mode (analog or digital)for the source you wish to play back. 9• Noise will be produced when a DTS source is played by selecting theanalog input.PreparationsRC-R0720RC-R0613INPUTSELECTORINPUT SELECTORINPUT MODELISTEN MODELSTN M.1Start playing the video software.2Press the LISTEN MODE or LSTN M. key to select thelistening mode.The listening mode settings are stored separately for each input. If theinput mode is set to digital auto (“AUTO SOUND” lights), the receiverselects the optimal listening mode automatically based on the type ofinput signal and the speaker settings.Each press of the LISTEN MODE or LSTN M. key switches thesetting as listed below.The listening mode settings are different depending on the typeof input signal.When the DTS signal is input:(The DTS indicator lights up.)1 DTS: DTS surround2 STEREO: Normal stereo playbackWhen the analog signal or the digital signal (except forDOLBY DIGITAL or DTS signal) is input:1 PL II MOVIE: PRO LOGIC II surround MOVIE mode(The PRO LOGIC indicator lights up.)2 PL II MUSIC: PRO LOGIC II surround MUSIC mode(The PRO LOGIC indicator lights up.)3 PRO LOGIC: PRO LOGIC II surround PRO LOGIC mode(The PRO LOGIC indicator lights up.)4 3 STEREO: 3-STEREO mode(The 3 STEREO indicator lights up.)5 CIRCLE SURROUND: CS 5.1 surround(The CS 5.1 indicator lights up.)6 ARENA: DSP Surround ARENA mode.7 JAZZ CLUB: DSP Surround JAZZ CLUB mode.8 THEATER: DSP Surround THEATER mode.9 STADIUM: DSP Surround STADIUM mode.0 DISCO: DSP Surround DISCO mode.- STEREO: Normal stereo playback. Sound is producedfrom the two front channels only.• If Dolby Digital or DTS signal having more channels than themaximum number of playback channels available using thereceiver’s current settings is input, the DOWNMIX indicator onthe front panel lights up and downmixing is performed to matchthe number of available channels.Notes• Depending on the type of the signal or speaker setting, some listeningmodes cannot be selected.• When playback is started, the sound may be cut or interrupted beforethe input source is confirmed as Dolby Digital.• To enjoy Dolby Digital surround (as well as all the other listeningmodes) from a single component, be sure to use a Dolby Digitalcompatible source component. Connect the Dolby Digital compatiblesource component's Dolby Digital format digital audio signal to one ofthe DIGITAL INPUT jacks on the back of the receiver. Connect thenormal audio signal correctly to the respective component's AUDIOjacks. 0!@#Adjust the volume.3When the DOLBY DIGITAL signal is input:(The DOLBY DIGITAL, PROLOGIC, or 3 STEREO indicator lights up.)1 DOLBY DIGITAL: DOLBY DIGITAL surround2 PL II MOVIE: PRO LOGIC II surround MOVIE mode(The PRO LOGIC indicator lights up.)3 PL II MUSIC: PRO LOGIC II surround MUSIC mode(The PRO LOGIC indicator lights up.)4 PRO LOGIC: PRO LOGIC II surround PRO LOGIC mode(The PRO LOGIC indicator lights up.)5 3 STEREO: 3-STEREO mode(The 3 STEREO indicator lights up)6 STEREO: Normal stereo playbackWhen you select DOLBY DIGITALSTEREOFMAMMHzkHz3DOWN MIXS.DIRECTMONITORDSPMEMOST.TUNEDAUTOTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSSP A RCLSRSRSLSLAUTO SOUND DIGITALSWLFE PRO LOGICSAmbience effects“DOLBY DIGITAL” will be scrolled from right to left.