Kenwood CD-4260M Instruction Manual

Contents

Kenwood CD-4260M Instruction Manual Manual pdf 18 page image

18PreparationChapter 1Chapter 2Chapter 3Chapter 4Chapter 5Chapter 6Chapter 7LA L AD AT R AE 3DDisc replacementDiscs can be replaced with the same procedure as “Loading discsin the carousel”. In stopped condition, all discs can be exchanged.However, when the disc door is opened while “DISC DETEC-TION” is being displayed, it may not be possible to remove thedisc which had been played. Accordingly, wait for the “DISCDETECTION” indication to go out before opening the disc door.When the disc information has been read in at the time of regis-tration of disc information like title, music type, etc., the discinformation can be recalled even when the disc insertion placeis changed. ª÷ When a title has been registered and the disc door is closed, readingoperation is performed automatically.The display flashes.In regard to ALL DATA READ modeThe disc information for all discs will be read. We recommend toexecute this mode before playback after discs have been exchanged.Close the disc door before operation.1 Press the MODE button.2 Select “ALL DATA READ”.3 Set the input.Each press switches the modes as follows:Search in progress orreading information The display flashes.When the disc is CD-TEXT÷ Repeat the above procedure so that the complete disc information isread into the CD player.÷ In the case of a non-CD-TEXT disc, the “D001:NO CD TEXT” displaywill appear for approx. 3 seconds.1. Please remove all CDs from the carousel before moving the unit.2. If blinking “PLEASE WAIT” is displayed when the disc door is opened, do not attempt to change the disc.4 Close the disc door.To quit ALL DATA READ modePress the 7 button.1 MUSIC TYPE2 USER FILE3 DISC SEARCH4 TITLE INPUT5 ALL DATA READ6 ALL INFORMATIONID CS DC TE CE IT 3ON NNotesNotesDD SI CC ER DA NI 3G0D 10 :: DC TA XE 3TMODEDISC SKIPDOWN UPSETTo display the title on a LCD remote control unit (provided with aKENWOOD Receiver or optional), perform the all data read opera-tion first, and operate the LCD remote control unit with the door leftclosed. For the operation of the LCD remote control unit, refer tothe instruction manual provided with your receiver or LCD remotecontrol unit.