Kenwood CT/KXF-W Instruction Manual

Also see for CT-203: Instruction manual Instruction manual Instruction manual Instruction manual Service manual

Kenwood CT/KXF-W Instruction Manual Manual pdf 21 page image

21CT-2050/203/KXF-W6010/W4010 (En/M)Start playing the CD.Set the record-pause mode.Adjust the recording level.2Press 7 key of theCD player.Press the 6 keyof the CD player.1 Play a CD. 4 Put the CD player in stopmode.34Press the 6 key of the CD player.To pause : Press the 6 key of the CD player.To restart recording : Press the 6 key of the CD player.To stop : Press the 7 key of the CD player.Preparation÷ If the stop (7) key of the cassette deck is pressed, the cassette deckenters the stop mode but the CD player does not stop.: Keys and control used in the operations described on this page.CD synchro recording÷ Synchro recording is not possible when tracks of more than one CD areprogrammed using a Carrousel type CD player.÷ Recording starts at this moment.÷ When the CD player has completed playback, the cassette deck stopsrecording and enters the stop mode.Convenient CD recording (CT-203/KXF-W4010; Deck B only)By connecting this unit with a KENWOOD "f", "ƒ", " (ƒ)", type amplifier (receiver) with a SYSTEM CONTROL jackand a KENWOOD CD player with a SYSTEM CONTROL jack using system control cords, recording on this unit and playback onthe CD player can be started simultaneously.Since this unit is not designed for recording with metal (TYPE ) tapes, do not use metal tapes for recording.1 Perform auto-bias adjustment. (The bias adjustment is applied to deck B.)÷ The optinum bias is set in about 40 seconds, after which the deckenters stop mode.÷ For a fine adjustment after setting AUTO BIAS, refer to the descriptionof "Bias level adjustment". (CT-2050/KXF-W6010 only) &÷ To cancel the auto-bias adjustment operation in the middle, pressthe stop (7) key.÷ Recording is possible even when the auto-bias setting is omitted.÷ While pressing the PAUSE (8) key, press the REC/ARM (¶) key.CT-2050/KXF-W6010CT-203/KXF-W40101 Complete the connections referring to"System connections". 62 Make “Playback (recording) preparation”.0(CT-203/KXF-W4010; Insert a tape indeck B.)3 (Load a disc in the CD player.)AUTO BIAS8PAUSE ¶REC/ARM8PAUSE ¶REC/ARM2 Set the record-pause mode.÷ While pressing the PAUSE (8)key, press the REC/ARM (¶) key.3 Adjust the recording balanceand recording level.“How to record.” ^