CT-2050/203/KXF-W6010/W4010 (En/M)24Timer operations34 Set the TIMER switch to REC.Set the amplifier volume to the minimum position.÷ Refer to the "How to use the MPX FILTER key". &÷ To cancel, press the MPX FILTER key again.Timer relay recording (CT-2050/KXF-W6010 only)÷ Set the desired time when the recording is to be started.÷ When the set time comes, the powers of the related components areturned ON and recording starts.÷ Recording stops when the end of side to be recorded is reached.÷ Read carefully the instruction manual of your audio timer.5 Set the timer.2 Adjust the recording level.1 Press the MPX FILTER key to ON.PreparationTimer recording of tuner broadcast (CT-203/KXF-W4010; Deck B only)1Set the power switches of the compo-nents to ON.2Set the input selector of the amplifier toTUNER.3Receive the desired radio station withthe tuner.4Make "Playback (recording) preparation".0(If relay recording is required, insert tapesin both decks A and B.)5(Remove the disc from the CD player.)÷ While pressing the PAUSE (8) key, press the REC/ARM (¶) key.÷ Refer to the "How to record". ^÷ Relay recording is not set, deck B will record.1. To ensure that the cassette deck’s automatic shut off switch operates before the power is shut off, set the timer so that it operates for a littlelonger than the playing time of the tape.2. Switch on the power to the cassette deck. (The timer will not operate if it is switched off.)MPX FILTER8PAUSE ¶REC/ARMTIMERREC OFF PLAYNotesNotes1 Set the record-pause mode.2 Adjust the recording balance andrecording level.CT-2050/KXF-W6010CT-203/KXF-W40101Press the MPX FILTER key to ON. &2Complete the procedure 1, 2, 3 of"Relay recording". (3Complete the procedure 3, 4, 5 of"Timer recording of tuner broadcast"."MPX" lights up.: Keys and control used in the operations described on this page.CT-2050/KXF-W6010 only(when recording FM broadcasts only)