Kenwood D-R350 Instruction Manual

Kenwood D-R350 Instruction Manual Manual pdf 11 page image

11D-R350 (En)1Preparing to Play TracksLoad/unload a disc.1 Open the tray.Label sideDisc tray2 Place/remove a disc.3 When loading or unloading other discsPreparationLoading/unloading discsClose the tray.ALL TEXT SEARCHFor most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.This allows text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other messages to be displayed faster.Blinks.÷ Repeat the above procedure so that the complete disc information isread into the CD player.÷ In the case of a non-CD-TEXT disc, the ”D1 : NO CD TEXT“ display willappear.Remote control unit onlyGRC operation : Complete the procedure in “Basic Operationsfor the Graphical Remote Control Unit (GRC)”90ON/STANDBY÷ Turn the unit ON.ON/STANDBYPOWER0DISC SKIP20ID CS R AE ID GN1D : CD ET TX«÷ Do not touch the played side of disc.÷ Loading two discs together will cause malfunctioning.÷ Place the disc properly along the groove on the tray. (If the disc is notplaced horizontally, malfunction will result.)÷ A single CD (8 cm disc) can also be played.÷ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot beused with this unit.÷ When loading/unloading a disc while the tray rotates, a malfunctionmight occur. Load/unload the disc when the tray does not rotate.RC operation GRC operation: Keys and control used in the operations described on this page.(For U.S.A. and Canada) (For other countries)All DISC indicators " " light regardless of how many discs arepresent.DISC1 2 3 4 5Search in progress orreading informationWhen the disc is CD-TEXT÷ The information read into the CD player is cleared when thetray is opened. Therefore, perform this operation again if thetray was opened.All Text SearchTextModeENTERENTERENTERAfter loading all the discs, operate in stop mode.FRAME/TIMEALL TEXTSEARCH