Kenwood DDX6054 Instruction Manual

Also see for DDX6054: Service manual Installation manual

Contents

54 DNX7240BT/DDX6054Audio Control[Bass Boost] Sets the amount of bass boost.(DNX7240BT only)"OFF"/ "Step1"/ "Step2"[Stream Information] Displays the presentsource information.The stream (Dolby Digital, dts, Linear PCM,MPEG, MP3, WMA or AAC) is displayed.Equalizer ControlYou can set up the equalizer.Display the Equalizer screen1Touch [ ] > [ ] > [Equalizer]. (page 53)Set each item2DNX7240BTDDX6054[SystemQ] Selects an equalizer curve type.You can select any of the following equalizercurves."Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top40"/"Jazz"/ "Game"*/ "iPod"*/ "User"⁄* DNX7240BT only.•"User" can be selected after graphic equalizer•adjustment is carried out. See Setup> (page 54)."User" can be selected after tone adjustment is•carried out. See (page 55)."iPod" uses the its equalizer function. Only iPod•sources can be selected.[SystemQ-Ex] Selects items to be adjusted fortone curve setup. (DDX6054 only)If turned "OFF", only Level can be setup fortone curves.[EQ] Displays the Graphic Equalizer setupscreen. (page 54) (DNX7240BT only)[Tone] Displays the Tone curve setup screen.(page 55) (DDX6054 only)Graphic Equalizer Setup (DNX7240BT)You can Manually set the equalizer curve.Display the Equalizer screen1Touch [ ] > [ ] > [Equalizer]. (page 53)Display the Graphic Equalizer screen2Set the Graphic Equalizer31111 Gain level can be adjusted by touching theeach frequency bar.[2], [3] Sets a frequency.[5], [∞] Sets a gain level.[EQ Init] Returns to the previous level whichthe gain level is adjusted.[Flat] Tone curve becomes flat.[Bass EXT] Bass Extend settings.If turned "ON", it extends the 62.5 Hz to thelow register by approximately 20%.[SW Level] Adjusts the subwoofer volume.