74 DNX7240BT/DDX6054Setup MenuSpeaker SetupYou can select a speaker type and its size to getthe best sound effects.Display the Speaker Select screen1Touch [ ] > [ ] > [Audio SETUP] >[Speaker Select]. (page 58)Select a speaker you wish to adjust2When the speaker type and size are set, thespeaker crossover network and equalizer curveare set automatically.DNX7240BT222111333DDX60542221113331 Front speaker2 Rear speaker3 Subwoofer[Subwoofer] Sets the availability ofsubwoofers. (DDX6054 only)[Tweeter] You can set the tweeter when youare selecting front speakers. (DNX7240BT only)If you are using a tweeter together with thefront speakers, set the tweeter to "ON". In the"ON" position, the Equalizer is adjusted to itsbest position.[X'over] Displays the Speaker Crossover Setupscreen.You can adjust the crossover setup that wasset automatically when you selected thespeaker type.Select a speaker type3You can select any of the following speakertypes.DNX7240BT"Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18cm, 4x6, 5x7, 6x8, 6x9, 7x10"Rear" NONE, OEM, 10 cm, 13 cm, 16 cm, 17cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10"Subwoofer" NONE, 16 cm, 20 cm, 25 cm, 30cm, 38 cm overDDX6054Standard, Narrow, Middle, Wide⁄Select "NONE" if you have no speakers.•Crossover Network SetupYou can set a crossover frequency of speakers.Select the speaker to set the crossover12221113331 Sets the High Pass Filter of the front speaker.2 Sets the High Pass Filter of the rear speaker.3 Sets the Low Pass Filter of the sub woofer.Display the Crossover setup screen2Set the crossover3
