DDX series DDX896/ DDX8046BT English 91Next page 3Next page 3AV Input SetupAV Input SetupYou can set AV input parameters.1 Display the AV-IN Setup screenTouch [ ] >> [ ] >> [AV-IN SETUP].(page 78)2 Set each item[AV-IN Interruption] Sets an imagedisplay of the system that is connectedvia the AV INPUT port. ( "OFF")"OFF": When the image source isswitched, an image entered via the AVINPUT port is displayed."ON": When an image signal is enteredvia the AV INPUT port, this image isdisplayed.[iPod AV Interface Use] Sets theterminal which iPod is connected.( "iPod")[AV-IN1 Name], [AV-IN2 Name], [AV-IN3Name] Sets a name to be displayedwhen you select a system that isconnected via the AV INPUT port.( "VIDEO")⁄• [iPod AV Interface Use]This item can be set when in STANDBY sourceand also the iPod is disconnected.• [AV-IN Name]Two AV-IN names are displayed when "iPod" isselected in [iPod AV Interface Use] and three aredisplayed when not selected.• [AV-IN3 Name]DNX9/ DDX8 series onlyAV Output Interface SetupAV Output Interface SetupYou can set AV output parameters.1 Display the AV-OUT Interface screenTouch [ ] >> [ ] >> [AV-OUTInterface]. (page 78)2 Set each item[AV-OUT] Selects an AV source to beoutput at the AV OUTPUT port.( "OFF")