Kenwood DDX9906XR Quick Start Manual

USB/iPod16USB/iPodConnecting a USB device1 Connect the USB device with the USBcable. (P.32)2 Press the [HOME] button.3 Touch [ ].4 Touch [USB]. (P.12)Ñ Disconnect the USB device1 Press the [HOME] button.2 Touch a source other than [USB].3 Detach the USB device.Ñ Usable USB deviceYou can use a mass-storage-class USB devicewith this unit.The word “USB device” appearing in this manualindicates a flash memory device.Connect iPod/iPhonePreparation• With an Apple CarPlay-capable iPhone, turnoff Apple CarPlay by operating the iPhone atfunctional setup before connecting iPhone.For details of the setup method, contact themanufacturer of the terminal.• Only one iPod/iPhone can be connected.Wired connectionPreparation• Connect an iPod/iPhone with the KCA-iP103(optional accessory) while Apple CarPlay is notconnected.1 Connect the iPod/iPhone using the KCA-iP103. (P.32)● To disconnect the iPod/iPhone connectedwith the cable:1 Detach the iPod/iPhone.Bluetooth connectionPair the iPhone through Bluetooth.Preparation• To connect an iPhone via Bluetooth, register itas a Bluetooth device and do the profile settingfor the connection beforehand. See Register theBluetooth device (P.20).• Connect an iPhone via Bluetooth while AppleCarPlay and an iPod/iPhone are not connectedvia USB.Ñ Connectable iPod/iPhoneThe following models can be connected tothis unit.Made for• iPhone X• iPhone 8 Plus• iPhone 8• iPhone 7 Plus• iPhone 7• iPhone SE• iPhone 6sPlus• iPhone 6s• iPhone 6 Plus• iPhone 6• iPhone 5s• iPhone 5c• iPhone 5• iPodtouch (6thgeneration)