Kenwood DDX9906XR Quick Start Manual

Basic Operations6Initial SettingsInitial setupPerform this setup when you use this unit firsttime.1 Set each item as follows.■ [Language]Select the language used for the controlscreen and setting items. Default is “AmericanEnglish(en)”.1 Touch [Language].2 Touch [Language Select].3 Select the desired language.4 Touch [ ].For details, see User Interface Setup(P.84) in the Instruction Manual.■ [Clock]Sets the synchronization of the clock andadjusts it.For details, see Calendar/clock settings(P.8).■ [Display]Set the key illumination color.If it is hard to see the image on the screeneven, adjust the viewing angle.1 Touch [Display].2 Touch [Key Color].3 Select the desired color.4 Touch [ ].(DDX9906XR / DDX8906S / DDX8706S /DDX819WBTL only)5 Touch [Display Adjustment].6 Adjust a viewing angle and a tilt position.7 Touch [ ].For details, see Display Adjustment(P.9).(DMX906S / DMX9706S only)5 Touch [Viewing Angle].6 Select a viewing angle.7 Touch [ ].For details, see Viewing Angle (P.9).For details, see Display Setup (P.86) inthe Instruction Manual.■ [Camera]Set the parameters for the camera.1 Touch [Camera].2 Set each item and touch [ ].For details, see Camera Setup (P.78) inthe Instruction Manual.■ [OEM SETUP](Except DDX819WBTL)This function requires a commercial adaptor.Consult your KENWOOD dealer for details.■ [DEMO]Set the demonstration mode. Default is “ON”.2 Touch [Finish].NOTE• These settings can be made from the SETUPmenu. See Setup (P.83) in the InstructionManual.