Other External ComponentsOther External Components2 Change the camera view.Touch the upper portion of the screen shownbelow.• Each time you touch, camera view changesamong front view camera, rear view camera, andAV-IN camera.To display parking guide line(Only for the rear view camera)Touch the area shown below, or set Guidelines> to [ON] (page 49).• To close the parking guidelines, touch the same areaagain.To exit the camera screenPress the HOME button on the monitor panel or touchthe area shown below.• When the gear is released from the reverse (R)position, the screen also returns to the previousplayback source screen.Connecting a camera to the AV-INterminalsSee page 58.• When connecting the external camera to the AV-INterminals, select [Camera] for the setting (page 49).For the rear view camera: The rear view screenis displayed by shifting the gear to the reverse (R)position when is set to[ON] (page 49).• A caution message appears on the screen. Toremove the caution message, touch the screen.For the front view camera: The front view screen isdisplayed by releasing the gear from the reverse (R)position when is set toother than [OFF] (page 49).Watching camera view1 Display the camera view.From the Home screen (page 3), touch asfollows:The camera view screen of one of the connectedcamera is displayed.Using an external component via ADSadapter — OEM FeaturesBy connecting this unit to the bus system of thevehicle using iDatalink (commercially available), thisunit can access the satellite radio source provided forthe vehicle and vehicle information can be displayedon this unit.• Displayable screens, key names, and screen namesvary depending on the type of the connectediDatalink and the model of the vehicle.• For details, visit .Connecting an ADS adapterSee page 58.Using an external component via an ADSadapter• For settings to use an ADS adapter, see page .511 Select “OEM Features” as the source.From the Home screen (page 3), touch asfollows:36 ENGLISH |
