SettingsSettingsReset the password of Android Auto wirelessconnection. For details, see page 11.This setting is available only when 2-way speakersystem is selected (page 43).• ON (Initial): Activates the key-touch tone.• OFF: Deactivates the key-touch tone.Memorize, recall, or clear the settings you have made.• The memorized settings are kept even when the unitis reset.• Available only when is set to[Unlock] (selected initially).Touch [Yes] to display the setting screen, then selectan operation:• Recall: Recalls the memorized settings.• Memory: Memorizes the current settings.• Clear: Clears the currently memorized settings andreturn to the factory (initial) settings.• Cancel: Cancels.A confirmation message appears. Touch [Yes].You can also set to lock the frombeing changed. Touch [Lock] to lock the settings.• Some items in menu, eg. X’over>, cannot be adjusted when [Lock] isselected.Selection for wireless Apple CarPlay/Android Auto orHDMI device.• HDMI: Select this to use the connected HDMI device.Wireless connected Apple CarPlay and Android Autowill be disconnected.• Wi-Fi (initial): Select this to use wireless AppleCarPlay/Android Auto. The system of this unit isrebooted after touching [OK].Get information, and change the settings for using theADS adapter.Initialize all settings you have made. Touch and hold[Enter] to initialize the settings.• After initializing the settings, adjust the settings onthe screen.Displays the serial number.Update the system by connecting a USB devicecontaining an update file.• To obtain the update file, visit.Connect a USB device with the update file to the unit.System InformationGNSS VersionHD Radio VersionApplication Version UpdateUpdateSystem VersionUpdateUpdateVxxxVxxxVxxxVxxxUpdate starts. It may take a while. If the update hasbeen completed successfully, “Update Completed.Please Ignition OFF” appears.Updates the system application.Updates the system.Updates the Global Navigation Satellite firmware. (Only for DMX809S)Updates the HD Radio firmware.• Do not disconnect the USB device while updating.• If the update has failed, turn the ignition switch offthen on, and retry the update.Shows the Open Source Licenses.51ENGLISH |
