Kenwood DMX809S Instruction Manual

Also see for DMX809S: Quick start guide

Wiring connectionInstallation and ConnectionInstallation and ConnectionP.CONTANT.CONTREMOTE CONTREMOTO INPUTSTEERING WHEEL¥MUTEILLUMIREVERSEPRK SW“(USB1)5V 1.5ATo the car chassis10 A fuseConnect the antenna cord to the antenna terminalUSB terminal (1 m)Purple with white stripeWhite ] / White with black stripe [Green ] / Green with black stripe [Gray ] / Gray with black stripe [Purple ] / Purple with black stripe [Orange with white stripeBlue with white stripe (12 V 350 mA)Red (Ignition wire)Yellow (Battery wire)Black (Ground wire)Light greenTo the car’s reverse lamp harness when using the optional rear view cameraTo the car light control switchTo rear speakers (right) / Tweeters (right) for 3-way crossoverTo front speakers (right) / Mid-range speakers (right) for 3-way crossoverTo rear speakers (left) / Tweeters (left) for 3-way crossoverTo front speakers (left) / Mid-range speakers (left) for 3-way crossoverCar batteryCar fuseTo the power control terminal when using the optional power amplifier (Or)To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antennaExtension wire ( ø )To the car’s parking brake detection switch harness(For best safety, be sure to connect the parking sensor.)Ignition key switchConnect to the video out terminal of the front camera(Not used for this unit)Light blue with yellow stripeBrownTo the steering wheel remote control adapter (not supplied)Connect a USB device59ENGLISH