Kenwood DMX809S Quick Start Manual

Also see for DMX809S: Instruction manual

You can use the mobile phone and portable audioplayer connected through Bluetooth• While using Apple CarPlay, Android Auto, or USBMirroring, use their features for hands-free phonesand audio playback. (The Bluetooth device currentlyconnected is disconnected when an iPhone withApple CarPlay or an Android device with AndroidAuto is connected.)Note• While driving, do not perform complicatedoperations such as dialing numbers, using the phonebook, etc. When you perform these operations, stopyour car in a safe place.• To use the Bluetooth function, you need to turn onthe Bluetooth function of the device.• Some Bluetooth devices may not be used with thisunit depending on the Bluetooth version of thedevice.• When a Bluetooth mobile phone is connected, thesignal strength and battery level are displayed whenthe information is acquired from the device.• If your mobile phone supports PBAP (Phone BookAccess Profile), you can display the following itemson the touch panel when the mobile phone isconnected.– Phone book– Dialed calls, received calls, and missed calls (up to100 entries in total)• Two devices for Bluetooth mobile phone and one forBluetooth audio can be connected at a time.However, when [Bluetooth Audio] is selected as thesource, you can connect up to five Bluetooth audiodevices and switch between these five devices.Bluetooth® DeviceBluetooth® DeviceBluetooth mobile phoneWhen a call comes in, this unit automatically enters[TEL], and when it ends, go back to the previoussource.When a call comes in...Incoming CallName1234XXXXXXDevice Name 11Device Name 221 Phone device information• Either hands-free phone 1 or 2 is highlightedto indicate which phone is ringing when a callcomes in.Touching the operation keys performs the followingactions:[ ] Answers a call.[ ] Rejects a call.• Call information is displayed if acquired.• Phone operation is not available while the picturefrom any camera is displayed.During a call...Talking... Name1234XXXXXXNR LEVEL – ++1EC LEVELMIC LEVEL– ++1– ++1DTMFPhone Name 11Phone Name 22Touching the operation keys performs the followingactions:[ ] Ends a call.[ ]/[ ]Switches between hands-free modeand phone mode.[DTMF] Enters DTMF (Dual Tone MultiFrequency). You can send a text usingthe keypad.NR LEVEL[–] / [+]Adjusts the noise reduction level.(–5 to 5)EC LEVEL[–] / [+]Adjusts the echo volume level.(–5 to 5)MIC LEVEL[–] / [+]Adjusts the volume level of themicrophone. (–10 to 10)• Press the VOL J/K buttons on the monitor panel toadjust the volume of the call or earpiece.23ENGLISH