Adjust the sound effect.Adjusts loudness.• OFF (Initial)/Low/HighSelects the bass boost level.• OFF (Initial)/Level 1/Level 2/Level 3Reduces the driving noise by raising the bandwidth.• OFF (Initial)/ONVirtually enhances the sound space using the DigitalSignal Processor (DSP) system (except for Digital Radioand Radio).Select the enhance level.• OFF (Initial)/Small/Medium/LargeCompensates the sound lost while audio compressionprocess (except for analog signals).• OFF/ON (Initial)Virtually makes the sound more realistic using theDigital Signal Processor (DSP) system. Select the soundlevel.• OFF (Initial)/Level 1/Level 2/Level 3SettingsSettingsMoves the center of the sound to the lower or higherpoint. Select the height.• OFF (Initial)/Low/Middle/HighTouch [J]/[K]/[H]/[I] or drag the mark to adjust.When is set to [2 way], you canadjust the front and rear speaker output balance.• F15 to R15 (Initial: 0)Adjusts the left and right speaker output balance.• L15 to R15 (Initial: 0)To clear the adjustment: Touch [Center].Preparation:Before making the adjustment for ,select the appropriate crossover network modeaccording to the speaker system (2-way speakersystem or 3-way speaker system).1 Put the unit in standby.From the Home screen (page 3), touch asfollows:2 Display the screen.Press the VOL K button on the monitor panel andtouch the upper right portion on the touch panelat the same time:3 Select the crossover network mode.[2 way] Select this when 2-way systemspeakers are used (front/rear/subwoofer).[3 way] Select this when 3-way systemspeakers are used (tweeter/midrange/subwoofer).A confirmation message appears. Touch [Yes].43ENGLISH
