SettingsSettingsWhen you shift the gear from the reverse position (R)to another position, the view screen changes to thefront view screen automatically and remains for thepreset period of time.• Selectable when and Camera Interruption> are set to [ON].• 5 Sec/10 Sec/15 Sec/20 Sec.• OFF (Initial): Not used.Configure the rear view camera settings.• ON (Initial): Displays the picture from the rear viewcamera when you shift the gear to the reverse (R)position.– A caution message appears on the screen. Toremove the caution message, touch the screen.• OFF: Select this when no rear view camera isconnected.• ON (Initial): Displays the parking guidelines.• OFF: Hides the parking guidelines.Adjust the parking guidelines according to the size ofthe car, parking space and so on.When adjusting the parking guidelines, make sure touse the parking brake to prevent the car from moving.Select the mark (1), and then adjust the position ofthe selected mark (2).InitializeMake sure that A and B are horizontally parallel, andthat C and D are the same length.• Touch and hold [Initialize ] for 2 seconds to set allthe marks to the initial default position.• ON (Initial): The sound is attenuated while the gear isshifted to the reverse (R) position.• OFF: Not used.Configure settings for using the ADS adapter.When an ADS adapter is connected, you can displayinformation about obstacles around the car.• ON: Always displays information.• Dyn. (Initial): Displays information when the sensordetects obstacles.• OFF: Cancels.Select where information about obstacles is displayedon the screen.• Left/Right (Initial)Select the usage of the AV-IN input terminal(adjustable only in Standby Mode (page 4)).• AV-IN (Initial): Select this when an external AV deviceis connected.To watch the connected device, select [AV-IN] onthe source/option selection screen.• Camera: Select this to watch the view from theconnected camera.To watch the camera view, select [Camera] on thesource/option selection screen.49ENGLISH |
