Kenwood DNN991HD Quick Start Manual

Also see for DNN9150BT: Instruction manual Quick start guide Quick start guide Instruction manual Instruction manual

133Return to the Top pageSetting UpÑEXT SW setupSet up the external switch power mode.1 Touch [EXT SW] in the System Menuscreen.EXT SW screen appears.2 Set each item as follows.Output PatternSet the power signal output mode among“Pulse”/“Level”. Default is “Pulse”.You can set to turn output on/off each timethe button on the EXT SW screen is touched.See External Device Control (P.136).Pulse SetSet the pulse signal output time.Outputs 500ms when “1” is set.Increases by 200ms with each step. Up to 100steps can be set.NOTE• You can enter characters only after you haveapplied the parking brake.• “Pulse”: Generates a single power signal pulse.• “Level”: Continues output of high power signal.ÑSetup memoryAudio Control, AV-IN SETUP, Camera, andAudio SETUP settings can be memorized. Thememorized settings can be recalled at anytime. For example, even when the settingsare cleared due to replacement of thebattery, the settings can be restored.1 Touch [SETUP Memory] in the SystemMenu screen.SETUP Memory screen appears.2 Follow the instruction on the screen.[Lock] / [Unlock]*Locks or unlocks the AV-IN SETUP, and AudioSETUP settings.YesMemorizes or recalls the settings.NoCancels the function or memorization.The SETUP Menu screen appears again.* When [Lock] is selected, you cannot changethe AV-IN SETUP, and Audio SETUP settings.Also, the locked key mark is displayedunder each setting icon in the setup menu.Continued