Kenwood DNN991HD Quick Start Manual

Also see for DNN9150BT: Instruction manual Quick start guide Quick start guide Instruction manual Instruction manual

137Return to the Top pageSetting UpCamera SetupYou can set camera parameters.1 Touch [ ] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Camera].Camera SETUP screen appears.4 Set each item as follows.Rear Camera*1Select the type of rear camera to use.CMOS-310: When the CMOS-3xx series with ID1 set is connected.Other (Default): When the other camera isconnected.R-CAM InterruptionSet a method for switching the display. Settingvalues are ON and OFF.ON: Switches to the rear view camera videodisplay when shifting to reverse orpressing the

*4 button for 1 second.OFF (Default): Switches to the rear viewcamera video display whenpressing the

*4 buttonfor 1 second.R-CAM Settings*2Adjust the CMOS-3xx series with ID 1 set. Fordetails, see the instruction manual of yourcamera.Front Camera*1Select the type of front camera to use.CMOS-310: When the CMOS-3xx series with ID2 set is connected.Other: When the other camera is connected.OFF (Default): When the front camera is notused.F-CAM Settings*3Adjust the CMOS-3xx series with ID 2 set. Fordetails, see the instruction manual of yourcamera.*1 These settings become settable only whenthe parking brake is on.*2 This setting becomes settable only whenthe parking brake is on and the CMOS-3xxseries is selected.*3 This setting becomes settable onlywhen the parking brake is on and “FrontCamera” is set to [ON].*4 [NAV Key Longer than 1 Second] must beset to “CAM”. See User interface (P.131).