54 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BTCalling by Voice RecognitionCalls by recognizing the registered voice.ڥ In order to perform voice recognition, voice mustbe registered in the Phonebook data. See Registration> (page 56). Or, to perform voice recognitionby Phone number category (Home, Office, Mobile etc.)of Phonebook data, a key word voice must be registered.See (page 57).1 Display the Voice Recognition screen2 Utter the voice registered in thePhoneBook1Utter within 2 seconds after the Beep.1 Cancels voice recognition.If the voice recognition is succeeded andthere is only one phone number found:2Make a call.2 Displays the phonebook list.Hands Free Unit ControlIf you hear another Beep sound:Speak the key word within 2 seconds after theBeep, or touch the [Phonebook List] button toselect the phone number.Make a call.ڥ If there are more than one phone numbers registeredunder the same name, and the key word voice isregistered for each phone number, you will hear anotherbeep. For how to register key word, see Registration> (page 57).If there are more than one phone numbersregistered under the same name, go to step3.3 Select a Phone number category4386573 Calls the displayed phone number.4 Creates an SMS to the displayed address.See (page59).5 Selects the Phone number category.6 Scrolls the phone number.7 Displays the Phonebook data list.8 Returns to the Hands-Free Control screen.4 Make a callڥ A message is displayed if the voice is not recognized.Read the message for the further operation.