88DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BTTone SetupYou can set a Tone curve.1Display the Tone screenSee (page 87).2Set the Tone1234567891Tone curve becomes flat.2Bass adjustment items are displayed.3Middle adjustment items are displayed.4Treble adjustment items are displayed.5Sets the Center frequency.6Sets the level.7Sets the Q factor. (Only Bass and Middle canbe set)8Bass DC Extend settings (Only when Bass isselected)If turned "ON", it extends the basscenter frequency to the low register byapproximately 20%.9Returns to the "Equalizer" screen.Audio ControlZone ControlYou can set the front and rear audio source.1Display Zone ControlTouchin the "AudioControl Menu" screen (page 86).11Displays the current source.2Set the Zone Control23342Turns the Zone Function (that sets differentsource sounds for front and rear speakers)On or Off.3Sets the front and rear audio sourceseparately.(This button appears when the Zonefunction is On.)ڥ When the rear speaker sound is switched, the audiosource that is output at the AV OUTPUT terminal is alsoswitched to the same source.4Adjusts the volume of the rear channel.(This button appears when the Zonefunction is On.)ڥ There are following limitations when zone function is setto "On".- There is no output from the subwoofer.- (page 87) are not available.- When "DVD" or "USB" is selected as the front source, therear source can be selected from "Front" (same sourceas front), "iPod" or "VIDEO", etc. When the rear source is