66 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BTAV Interface SetupYou can set audio and visual (AV) interfaceparameters.1 Display the AV Interface screenTouch in the "SetupMenu" screen (page 60).2 Setup each item12341 Moves to the "AV Interface 2" screen.2 Sets a name to be displayed when youselect a system that is connected via the AVINPUT port. ( "VIDEO")3 Sets an image display of the system that isconnected via the AV INPUT port. ( "OFF")"OFF": When the image source is switched,an image entered via the AV INPUTport is displayed."ON": When an image signal is enteredvia the AV INPUT port, this image isdisplayed.4 Selects a navigation system connection.( "RGB") (DDX514/DDX5034/DDX5034BTonly)"RGB": Allows the Kenwood's NavigationSystem to connect via the AV INPUTport."AV-IN": Allows a third-party navigationsystem to connect via the AV INPUTport."Off": Must be used if no navigationsystem is connected. (Thenavigation display is cancelledwhen the AV source is switched.)Setup Menu5 6789105 Returns to the "AV Interface 1" screen.6 Moves to the "AV Interface 3" screen.7 Selects an AV source to be output at the AVOUTPUT port. ( "AV-IN")⁄• When in DVD source, "AV-OUT" cannot be set to USB. Or,when in USB source, "AV-OUT" cannot be set to DVD.• If "AV-OUT" is set to DVD or USB, the same source videoor control screen as the front monitor is displayed in therear monitor.• If the front source is switched from DVD (or USB) toanother source, the rear source is also switched tothe same source as front. In this case, displaying thenavigation screen in front monitor allows the rear sourceto return to the DVD (or USB). Use the easy controlbuttons to operate the front source.8 Sets output of operation screen such ascontrol screen to AV-OUT. Operation screenis not output when set to "Black".( "Through")9 Sets a method to switch to the rear viewcamera video display. ( "OFF")"ON": Switches to the rear view cameravideo display when engaging theshift knob of car to "Reverse"."OFF": Switches to the rear view cameravideo display when engaging theshift knob of car to "Reverse" andthen pressing the [NAV] button formore than 1 second.p You can flip the left and right of the rearview camera video display. Set to "ON" andthe the rear view will be displayed left andright in mirror image on the screen.( "OFF")