Kenwood DNX5140 - Wide Double-DIN In-Dash Nagivation Instruction Manual

Also see for DDX5034BT: Service manual Installation manual Instruction manual

Contents

64 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BTSetup MenuSystem SetupYou can set up the system parameters.1 Display the System Setup screenTouch in the "SetupMenu" screen (page 60).2 Setup each item523411 Moves to the "System Setup 2" screen.2 Turns the key touch tone On or Off.( "ON")3 Allows scrolling of text display on theSource Control screen. ( "Auto")"Auto": Scrolls the screen automatically."Manual": Allows you to scroll the screenmanually.4 Selects a remote control signal. ( "ON")When turned "OFF", the remote control ofTV reception is rejected.5 Sets a music CD playback. ( "1")"1": Automatically recognizes and playsback an Audio file disc, a DVD or amusic CD."2": Forcibly plays back a disc as a musicCD. Select "2" if you wish to play amusic CD having a special format orif you cannot play a disc in the "1"position.⁄• You cannot play an Audio file/VCD disc in the "2"position. Also, you may not play some music CDs in the"2" position.• Your setup is disabled when the disc is being played.6 7896 Returns to the "System Setup 1" screen.7 Moves to the "System Setup 3" screen.8 Sets the button illumination color.See (page 65).9 When set to "ON", the illumination color ofthe screen and buttons changes one afteranother.10131211p Returns to the "System Setup 2" screen.q Moves to the "System Setup 4" screen.w Sets the Preout output. (Settable only whenin Standby mode)"Rear" : Rear sound is output."Subwoofer" : Subwoofer sound is output.e Sets the function of the [NAV] button."V. OFF" : Press the [NAV] button formore than 1 second to turn thedisplay off."R-CAM" : Press the [NAV] button for morethan 1 second to switch to rearview.1415r Returns to the "System Setup 3" screen.