— 30 —EnglishInstallationInstallation (for TOYOTA, NISSAN Car etc.)When performing a check of the CD operation prior to installation,place this unit in a hirizontal position and perform a loading/ejectof the CD.2CAUTIONInstall onto the car bracket using the supplied screws (M5 × 6mm). The holes of the car bracket to use will differ depending onthe car model.When a ground wire isincluded in the wiring kit(which is sold separately),fasten the ground wirewith the binding screwlocated on the rear panelof this unit.Accessory2(M4 × 6 mm)Accessory1or Accessory0(M5 × 6 mm)Accessory3(Only for NISSAN car)Installation (for HONDA/ ACURA Car)AssemblyBottompanel(The applicationposition ofAccessory5 is at thebottom panel)Fit the projections on both sides of theAccessories 6 and 7 into the slits onthe Accessory4.Accessory4Accessory0(M5 × 6 mm)Accessory7 (R)Accessory6 (L)Accessory0(M5 × 6 mm)You can choose from three installation types to fit your car.Perform "Assembly" before installation.

Safety precautions

Handling Compact discs

Power

Volume

Adjusting Time

Illumination Color Selection

Panel Angle Adjustment

Tuning

Station Name Preset (SNPS)

Clean Reception System Circuit (CRSC)

Playing CDs

Playing Other Disc mode

Fast Forwarding and Reversing Disc Play

Track Scan

Magazine Random Play

DSP (Digital Signal Processor)

Preset Equalizer(KBS - Kenwood Built-in Sound) Selection

Function Set System

Variable Illumination Color

Security Code

Selecting Tuning Mode

Basic operations of remote

Accessories

Connecting Wires to Terminals

Installation

Troubleshooting Guide

Specifications

Kenwood DPX-7010MD Instruction Manual

DPX-7010MD

parts list