Kenwood DPX-7010MD Instruction Manual

Also see for DPX-7010MD: Service manual Service manual

Kenwood DPX-7010MD Instruction Manual Manual pdf 9 page image

— 9 —You can select the display illumination colors.Switching the illumination color:Press the COL button."Color CTRL" is displayed once theIllumination Color Selection mode is entered.Press the COL button.The illumination color name currently set appears in thedisplay.Each time you press the COL button, the illumination colorswitches as follows;Press the COL button for at least one second to end theIllumination Color Selection mode.4"Variable Color""Blue""Red""Lime White""Lavender""Yellow green""Pink""Light blue""Green""Purple""Emerald green""R-# / G-# / B-#"(User setting)The pre-set color switches in sequence for5 secconds each.321Illumination Color Selection User settingYou can set any colors you like, by adjusting the amount ofRed, Green and Blue blended into each one.•The "#" display indicates the setting value.• The default setting is "R-1 / G-1 / B-1".Press the COL button."Color CTRL" is displayed once theIllumination Color Selection mode is entered.Adjusting the Red color:Each time you press the #1 button, the Red color displayswitches as follows;Adjusting the Green color:Each time you press the #2 button, the Green color displayswitches as follows;Adjusting the Blue color:Each time you press the #3 button, the Blue color displayswitches as follows;Press the COL button for at least one second to end theIllumination Color Selection mode.If any two of the three colours Red, Green and Blue are set to "-0", you will not be able to adjust the colours. Set the colours tovalues other than "-0".NOTE33 " B-1" 3 " B-2" 3 "B-3 " 3 "B -4" 3 " B-0"23 "G-1" 3 "G-2 " 3 "G-3" 3 "G-4" 3 "G-0"23 "R-1" 3 "R-2 " 3 "R-3" 3 "R-4" 3 " R-0"21NOTE