Kenwood DPX502U Instruction Manual

Also see for DPX502U: Firmware update guide Service manual

Kenwood DPX502U Instruction Manual Manual pdf 26 page image

26 | EnglishMenu systemIn Standby modeSynchronize ClockSynchronizing the RDS station time data and thisunit’s clock.Display Setting"SYNC ON" Synchronizes the time."SYNC OFF" Adjust the time manually.⁄• It takes 3 to 4 minutes to synchronize the clock.Display Illumination ControlThis function turns off the display when youperform no operation for 5 seconds. This function iseffective when you are driving at night.Display Setting"DISP ON" Keeps the display on."DISP OFF" Turns off the display when you perform nooperation for 5 seconds.⁄• Set the Display Illumination Control when the (page 31) is set to OFF.• When the display is off, pressing any key will turn on thedisplay.• When the display is off, you cannot perform anyoperation except for the following:• Volume• Attenuator• Selecting the source• Ejecting the disc• Turning off the power• USB remove mode• During function control, such as the Menu System, thedisplay stays on.In Standby modeDimmerDimming this unit’s display automatically when thevehicle light switch is turned ON.Display Setting"DIM AUTO" The display dims."DIM OFF" The display doesn’t dim.In Standby modeSwitching preoutAlternating the preout between the rear andsubwoofer. (With the subwoofer the sound outputswithout being effected by fader control.)Display Setting"SWPRE R" Rear preout."SWPRE SW" Subwoofer preout.In Standby modeManual Clock Adjustment⁄• You can do this adjustment when the (page 26) is set as OFF.1 Select Clock Adjustment modePush the Control knob towards up or down.Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the hoursPush the Control knob towards up or down.Adjust the minutesPush the Control knob towards right or left.4 Exit Clock adjustment modePress the [MENU] button.