Kenwood DPX502U Instruction Manual

Also see for DPX502U: Firmware update guide Service manual

Kenwood DPX502U Instruction Manual Manual pdf 9 page image

English | 9Adjusting the detail of Audio ControlAmong the Basic Audio items, you can adjust the Basslevel, Middle level, and Treble level in detail.1 Select the Basic Audio itemSelect the desired item to be set in detail fromfollowings;• Bass level• Middle level• Treble levelFor how to select Basic Audio items, see Control> (page 8).2 Enter Detail adjustment mode of AudioControlPress the [VOL] knob for at least 1 second.3 Select the Detail Audio item to adjustPress the [VOL] knob.Each time you press the knob, the item to beadjusted alternates between the items shown inthe table below.4 Adjust the Detail Audio itemTurn the [VOL] knob.Bass levelAdjustment Item Display RangeBass Center Frequency "BAS F" 40/50/60/70/80/100/120/150 HzBass Q Factor "BAS Q" 1.00/1.25/1.50/2.00Bass Extend "B EX" OFF/ONMiddle levelAdjustment Item Display RangeMiddle Center Frequency "MID F" 0.5/1.0/1.5/2.0 kHzMiddle Q Factor "MID Q" 1.0/2.0Treble levelAdjustment Item Display RangeTreble Center Frequency "TRE" 10.0/12.5/15.0/17.5 kHz5 Exit the Detail Audio Control modePress the [VOL] knob for at least 1 second.⁄• When you set the Bass Extend to ON, low frequencyresponse is extended by 20%.• You can exit the Audio Control mode at anytime bypressing any button except for [VOL] knob and [ATT]button.