29DVR-505/DVR-7000 (EN)OperationsDVDChanging the Audio LanguageIf the disc was created with different language tracks,you can use the Banner Display to temporarily changethe DVD player’s Audio setting.You can change the Subtitle language while you’rewatching a disc (but only if the disc was created withsubtitles).DVDChanging the Subtitle Language2 Press the Cursor left/right (2/3) keysuntil the AUDIO icon is highlighted.3 Press the ENTER key.The audio menu appearsUsing the on-screen banner displayUsing the on-screen banner display4 Select the audio language withpress the ENTER key.1. The language feature only works if the disc was createdwith multiple audio tracks.2. When you chose an audio language from the Banner Dis-play, you only override the audio language setting in theDVD Player’s main menu (in the Language Preferencesmenu within Setup menu) temporarily.1 During playback, press the ONSCREEN key on the remote.1 During playback, press the ONSCREEN key on the remote.2 Press the Cursor left/right (2/3) keysuntil the SUBTITLE icon is high-lighted.3 Press the ENTER key.The subtitle menu appears4 Select the subtitle language withpress the ENTER key.5 Press the S.TITLE key to subtitle ONor OFF.1. The subtitle feature only works if the disc was createdwith multiple subtitle tracks.2. The subtitle menu of the disc appears in some discs.÷ The menu is switched off when no operation isperformed for about 5 seconds.÷ The menu is switched off when no operation isperformed for about 5 seconds.Displayed whenSUBTITLE is ONUsing the On-screen banner displayNotesNotes NotesNotesRDSONSCREENENTERENTERENTERS.TITLERDSONSCREENENTERENTER ENTER