34DVR-505/DVR-7000 (EN)OperationsDVD CD VCDProgram playProgram Edit1 During stop mode, press the P.MODEkey on the remote.2 Select specific title/chapter ortrack by Press Cursor up/down(5/∞) keys or numeric keys (0-9).3 Press the ENTER key.Program edit display appears.(An example of DVD program edit menu)4 Select Add icon on the screen toregister selected value ontoPlaylist, then press the ENTER key.You can listen to the desired tracks or chapters of the current disc in any desired order.5 You can select maximum 32 val-ues by repeating step 2 - 4.6 Press the PLAY key to start play-back.2 : Selected icon: An icon which can be selected: An icon which presently can not be selected÷ When you don’t add values onto “Playlist” andreturn to play mode, select Done icon and pressENTER key on the remote.÷ While a disc is playing, press P.MODE key on theremote to start Program play÷ To return to standard play, press the P.MODE keyagain.÷ MP3 discs can not be programmed with this pro-gram mode. (MP3 program play q)Add icon --- Add value onto “Playlist”Delete icon --- Delete value from “Playlist”Insert icon --- Insert value in “Playlist”Play icon --- Play program playDone icon --- Return to stop or resume modeRegistering and playing the programInsert the disc to be used in programming in the tray, close it and press the PLAY key so that the player reads thedisc information by playing disc until display “READING” disappears. (If the tray is opened after this, the aboveprocedure should be repeated so that the player reads disc information again.)PROGRAM EDIT2 AllAddDeleteCTPlayDoneTitle(12) (2)ChapterPlaylistPROGRAM EDIT2 AllAddDeleteCTPlayDoneTitle(12) (2)ChapterPlaylist2 AllNoteNoteP.MODE+100ENTERENTERENTER ENTER