Kenwood DVR-505 Instruction Manual

Also see for DVR-505: Instruction manual Service manual

Contents

4PreparationsDVR-505/DVR-7000 (EN)UnpackingUnpack the unit carefully and make sure that all accessories are put aside so they will not be lost.Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unitwas shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) canfile a claim against the carrier for shipping damage.We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.Keep this manual handy for future reference.AccessoriesPlease confirm that the following accessories are present.FM indoor antenna (1) Loop antenna (1)Remote control unit (1) Batteries (LR03/AAA) (2)*AC plug adaptor (1) * Use to adapt the plug on thepower cord to the shape ofthe wall outlet.(Accessory only for regionswhere use is necessary.)Video cord (1)System Front speakers and surround speakers SubwooferDVR-505 KS-305DV (Left speaker, right speaker, SW-15DVcenter speaker and surround speakers)DVR-7000 KSW-7000 (Left speaker, right speaker, center speaker, surround speakers and subwoofer)The space between radio channels has been set to the onethat prevails in the area to which the system is shipped.However, if the current channel space setting does notmatch the setting in the area where the system is to be used,for instance when you move from area 1 or area 2 shown inthe following table or vice versa, proper reception of AM/FMbroadcasts cannot be expected. In this case, change thechannel space setting in accordance with your area by refer-ring to the following table.(Except for the U.S.A., Canada, U.K., Europe and Australia)CHANNELSPACE frequencyArea12USA, Canada and SouthAmerican countriesOther countriesFM : 100 kHzAM : 10 kHzFM : 50 kHzAM : 9 kHzSetting the CHANNEL SPACE1 Set the POWER key to standby (power off) mode.2 press the STOP key, the ¢ key and the 4 key onmain unit in this order.Each operate step 2, switches the modes as follows.1 “FM100/AM10 kHz” STEP2 “FM 50 /AM 9 kHz” STEPCHANNEL SPACE settingAccessories packed with the main unitSpeaker model namesSCART plug (1) (for U.K. only)Speaker cords (6)