8PreparationsDVR-505/DVR-7000 (EN)Label sidePlaying sideCleaningIf fingerprints or foreign matter become attachedto the disc, lightly wipe the disc with a soft cot-ton cloth (or similar) from the center of the discoutwards in a radial manner.StorageWhen a disc is not to be played for a long periodof time, remove it from the player and store it inits case.HandlingHold the discs so that you do not touchthe playing surface.Disc handling precautionsDisc accessoriesThe disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality orprotecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction.Do not attach paper or tape to eitherthe playing side or the label side of thediscs.StickerSticky pasteNever play a cracked or warped discDuring playback, the disc rotates at high speed in the player.Therefore, to avoid danger, never use a cracked or deformed discor a disc repaired with tape or adhesive agent.Please do not use discs which are not round because they maycause a malfunction.Maintenance of the SetWhen the front panel, the case, etc. becomes dirty, wipe with asoft, dry cloth. Do not use thinner, alcohol, etc., as these cancause discoloration.In regard to contact cleanersDo not use contact cleaners because it could cause a malfunction.Be specially careful not to use contact cleaners containing oil, forthey may deform the plastic component.MaintenanceCAUTION:Use of controls or adjustments or performance of procedures other thanthose specified herein may result in hazardous radiation exposure.In compliance with Federal Regulations, following are reproductions oflabels on, or inside the product relating to laser product safety.KENWOOD CORPORATION2967-3, ISHIKAWA-CHO,HACHIOJI-SHI,TOKYO, JAPANKENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TODHHS REGULATIONS NO. 21 CFR1040.10, CHAPTER 1, SUBCHAPTER J.Location: Back PanelCAUTION- LASER RADIATION WHEN OPEN.DO NOT STARE INTO BEAM.Location: Laser Pick-up Unit Cover inside this productFor the U.S.A.FCC WARNINGThis equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless themodifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change ormodification is made.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radiocommunications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of the following measures:– – Reorient or relocate the receiving antenna.– – Increase the separation between the equipment and receiver.– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– – Consult the dealer or an experienced radio / TV technician for help.For the U.S.A.