|
Putting a station with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select the Auto Memory Entry modePress the [FM] or [AM] button.Select the "A-MEMORY" display.4 Open Auto Memory EntryPress the [4] or [¢] button for at least 2 seconds.When 6 stations that can be received are put in the memoryAuto Memory Entry closes.• When the (page 20) is ON, only RDS stations areput in the memory.• When Auto Memory Entry is done in the FM2 band, the RDSstations preset in the FM1 band aren't put in the memory.Likewise, when it is done in the FM3 band, RDS stations preset inFM1 or FM2 aren't put in the memory.Auto Memory EntryPutting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the [1] — [6] button for at least 2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in the memory on each [1] —[6] button.Station Preset MemorySelecting the station.1 Select tuner sourcePress the [SRC] button.Select the "TUNER" display.2 Select the bandPress the [FM] or [AM] button.Each time the [FM] button is pressed it switches between theFM1, FM2, and FM3 bands.3 Tune up or down bandPress the [4] or [¢] button.During reception of stereo stations the "ST" indicator is ON.TuningTuner features— 10 —English PreviousNext |