Kenwood KDC-4027 Instruction Manual

— 23 —1234567812345678P.CONTANT.CONTREARLRREMO.CONTTEL MUTERear right output (Red)4 10Rear left output (White)Connector Function GuidePin Numbers forISO Connectors Wire Color FunctionsExternal PowerConnectorA–4A–5A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right (+)Front Right (–)Front Left (+)Front Left (–)Rear Left (+)Rear Left (–)KENWOOD disc changer input (KDC-4027/4027V only) 14Battery wire (Yellow)Ignition wire (Red)FM/AM antennainput 3Antenna Cord (ISO) 1Antenna Conversion Adaptor(ISO–JASO) (Accessory3) 2To connect the Disc changer, consult yourDisc changer manual. 15Wiring harness(Accessory1) 16If no connections aremade, do not let the wirecome out from the tab. 18Power control/ Motorantenna control wire(Blue/White) 20 Connect either to the powercontrol terminal when usingthe optional power amplifier,or to the antenna controlterminal in the vehicle. 23A–7 Pin (Red) 8A–4 Pin (Yellow) 9Connector AConnector BFuse (10A) 13Connecting Wires to TerminalsSee page 24To Steering remote (Blue/Yellow)(Optional Accessory)To connect theKENWOOD navigationsystem, consult yournavigation manual. 221TEL mute wire (Brown) Connect to the terminal that isgrounded when either thetelephone rings or duringconversation. 21