Kenwood KDC-4027 Instruction Manual

1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Control modePress the [AUD] button for at least 1 second.3 Select the Audio item for adjustmentPress the [FM] or [AM] button.Each time the button is pressed the items that can be adjustedswitch as shown below.4 Adjust the Audio itemPress the [4] or [¢] button.Adjustment Item Display RangeBass level "BAS" –8 — +8Middle level "MID" –8 — +8Treble level "TRE" –8 — +8Balance "BAL" Left 15 — Right 15Fader "FAD" Rear 15 — Front 155 Exit Audio Control modePress the [AUD] button.Audio ControlEasy "EASY"• Each setting value is changed with the (page8).First, select the speaker type with the Speaker setting.• When the System Q setting is changed, the Bass, Middle, andTreble set in audio control replace the System Q values.You can recall the best sound setting preset for different types ofthe music.1 Select the source to setPress the [SRC] button.2 Select the Sound typePress the [Q] button.Each time the button is pressed the sound setting switches.Sound setting DisplayFlat "FLAT"Rock "ROCK"Top 40 "TOP40"Pops "POPS"Jazz "JAZZ"System QCompensating for low and high tones during low volume.Press the [LOUD] button for at least 1 second.Each time the button is pressed for at least 1 second theLoudness turns ON or OFF.When it’s ON, "LOUD" indicator is ON.LoudnessTurning the volume down quickly.Press the [ATT] button.Each time the button is pressed the Attenuator turns ON or OFF.When it’s ON, the "ATT" indicator blinks.Attenuator— 7 —