Kenwood KDC-7080R/RV Instruction Manual

Once the name is displayed for the station you want tolisten toPress the OK button.Reception starts of the displayed station, and the seek modeends.Cancelling mode during input:Press the DNPP button.The seek mode is cancelled.2You can search for the preset station with Programme Servicename.Press the DNPP button on the remote control."SNPP" will be displayed once the seek mode is entered.The names of the stations preset in the band currently listenedto are displayed for 5 seconds each.The display band switches in the following order:Each time you press the ¢ button, the station displayswitches in the forward direction.Each time you press the 4 button, the station displayswitches in the reverse direction.Stations which have no names will be displayed asfrequencies.Changing the Displayed BandPressing the FM button switches between the FM1, FM2, FM3and AM displays, in that order.Pressing the AM button switches between the displays in thereverse direction.NOTE= FM1 Ô FM2 Ô FM3 Ô AM +1Preset station seek with Programme servicename(Function of Remote Control)Select the band/ station that you want to have stored.Hold down the button (#1-6) that you want to use for thestation, for two seconds or more.The button number blinks once in the display to indicate thatthe data has been stored.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.The number of the recalled station is displayed.You can store 6 stations in each of the FM1, FM2, FM3, and AM(MW and LW) bands.NOTE21— 15 —