Kenwood KDC-7080R/RV Instruction Manual

Fast Forwarding Disc Play:Hold down on the ¢ button.Release your finger to play the disc at that point.Reversing Disc Play:Hold down on the 4 button.Release your finger to play the disc at the point.You cannot use reverse play between tracks depending on themodel being connected. Instead, the reverse play function iscancelled when it reaches the beginning of a track, at whichpoint normal play automatically resumes.NOTEFast Forwarding and Reversing Disc PlayThe disc will start playing.The external disc control mode will differ, depending on the unitthat is connected.Mode Display Examples• "CD2" ...when a CD player is connected• "DISC" ...when a disc changer is connected• "DISC-1" , "DISC-2" ...when two disc changers are connectedPausing and Restarting Disc Play:Press the 38 button to make the disc pause.Press the same button again to start play again.• When one disc has finished playing its last track, the next discin the changer starts playing. When the last disc in the changerhas finished, the player returns to the first disc and startsplaying it.• Disc #10 is displayed as "0".NOTENOTEThis function permits the connection of optional players andthe playing of discs other than the loaded CD (in the currentunit).Playing Discs:Press the SRC button repeatedly to select the external disccontrol mode.Playing Other Disc modeThe CD will start playing.Pausing and Restarting CD Play:Press the 38 button to make the disc pause.Press the same button again to start play again.Eject:Press the ¡(EJECT) button. The faceplate will slide to ejectthe CD.Press the ¡(EJECT) button to close the faceplate.• Do not attempt to insert a CD into the slot if another one isalready there.• The unit can only play 12-cm (5-inch) CDs. If you insert an 8-cm(3-inch) CD, it will get stuck inside and can cause the unit tomalfunction.• When the faceplate has been slid open, it might interfere withthe gear lever or something else. If this happens, pay attentionto safety and move the gear lever or take an appropriate action,then operate the unit.• The sound will be temporarily muted whilst the faceplate ismoving.• The only buttons that will work during the eject state are the¡(EJECT), SRC, TI, and ATT buttons, as well as the volumecontrol button.• When you load a CD and eject it right away, the next time youtry to insert the CD may not load. In such a situation, take theCD out for a moment and then reinsert it.NOTE2CAUTION— 21 —